T8000A is the Model Name of Programmable led controller which controls up to 8000 led individually. In this controller, 8 ports are there which are used to control 1000 led per port. Each Port has GND, DATA, CLK pins.
In this controller, 4 buttons are there which are used to change program sequence and set program effect. Lower two buttons are used to change the speed of the program one for the increase and another for decrease.
This controller support up to 16GB of memory card
Supported LED Driver chips
T8000 TTL SYNCHRONIZING
If you are using a multiple controllers networked together ,You only needs a single SD cad inserted in to the first controller in the network .You can place the each controllers programs inside that SD card.
above picture shows how to place those program files.first two digits stands for program number (00 to 16) ,The digits after the “_” character is the controller number starting from “1” .
Controller 1 program files – 00_1.led ,01_1.led,02_1.led,03_1.led,04_1.led
Controller 2 program files – 00_2.led ,01_2.led,02_2.led,03_2.led,04_2.led
Controller 3 program files – 00_3.led ,01_3.led,02_3.led,03_3.led,04_3.led
Controller 4 program files – 00_4.led ,01_4.led,02_4.led,03_4.led,04_4.led